Method and setup for determining the polarization parameters of optical elements

Expand
  • 1. School of Science,Southwest University of Science and Technology,Mianyang,Sichuan 621010,China; 2.Institute of Optics and Electronics,Chinese Academy of Sciences,Chengdu,Sichuan 610209,China

Received date: 2017-03-03

  Revised date: 2017-08-29

  Online published: 2018-04-21

Abstract

Based on the polarized light theory,the polarization change of a linearly polarized light after   reflected from one or more optical elements is investigated theoretically. It is found that through appropriately setting   the amplitude reflection coefficients ( rs   ,rp   ) of optical elements,the polarization deterioration of the polarized light   induced by several optical elements can be lower than that induced by one element. A method for determining the   incidence plane of a light ray is given. In the experimental setup,the polarization maintaining ratios of two 780 nm high-reflection mirrors ( with dielectric and metallic coatings,respectively) at 45o( for both polarization angle and incidence angle) are determined to be 1 000 ∶ 1 and 40 000 ∶ 1,respectively. The amplitude coefficient ratio rp /rs and phase difference δ are in good agreement with those measured by the ellipsometry. This method and setup can, on the one hand,provide theoretical and experimental guidance for polarization-related physics experiments,and on the other hand,can be applied in scientific research and engineering fields for in-situ measurement of the reflection parameters ( rp /rs and δ) and polarization maintaining ratio of optical elements.

Cite this article

LIU Ming-qiang1,2 . Method and setup for determining the polarization parameters of optical elements[J]. College Physics, 2018 , 37(4) : 41 -46 . DOI: 10.16854 /j.cnki.1000-0712.170099

Outlines

/