大学物理 ›› 2023, Vol. 42 ›› Issue (2): 59-.doi: 10.16854/j.cnki.1000-0712.220117

• 大学生园地 • 上一篇    

基于有限元的钢丝绳漏磁检测定量仿真分析

郏荣荣,杨舒佩,郭泽虹,李国烜,黄铠杰,彭  力   

  1. 1. 华南师范大学 物理与电信工程学院,广东  广州510006;2. 华南师范大学 物理国家级实验教学示范中心,广东  广州510006;
    3. 华南师范大学 (清远)科技创新研究院有限公司,广东  清远511517
  • 收稿日期:2022-03-05 修回日期:2022-04-17 出版日期:2023-04-20 发布日期:2023-04-20
  • 通讯作者: 彭力,E-mail: pengli27@126.com
  • 作者简介:郏荣荣(1999—),女,河南驻马店人,华南师范大学物理与电信工程学院2019级本科生.
  • 基金资助:
    国家自然科学基金(61975058)资助

Quantitative simulation analysis of magnetic flux leakage detection  for wire rope based on finite element method

JIA Rong-rong1, YANG Shu-pei1, GUO Ze-hong1, LI Guo-xuan1, HUANG Kai-jie1, PENG Li1,2,3   

  1. 1. School of Physics, South China Normal University, Guangzhou, Guangdong 510006, China; 2. Telecommunication Engineering, 
    South China Normal University, Guangzhou, Guangdong 510006, China; 3. Qingyuan Institute of Science and Technology 
    Innovation Co. Ltd., South China Normal University, QingyuanGuangdong 511517, China 
  • Received:2022-03-05 Revised:2022-04-17 Online:2023-04-20 Published:2023-04-20

摘要: 漏磁检测法是钢丝绳无损检测中的常用方法.基于漏磁检测基本原理和三维磁偶极子模型,本文利用By-Bz图实现了对钢丝绳直观的在线检测,运用有限元仿真的方法,得到了不同长度、宽度、深度缺陷的漏磁特点,构建了By-Bz图中漏磁圆与缺陷程度之间的定量关系,讨论了钢丝绳内、外缺陷产生的漏磁场的区别,并进行了实验验证,以期为钢丝绳损伤的定量识别以及内外缺陷的判定提供新思路.

关键词: 漏磁检测, 三维磁偶极子, 有限元分析, 定量分析

Abstract:  Magnetic flux leakage (MFL) testing is a common method in nondestructive testing of wire rope. Based on the basic principle of MFL detection and threedimensional magnetic dipole model, this paper realizes  the visualized online detection of wire rope by using By~Bz diagram. The characteristics of MFL defects of different lengths, widths and depths are obtained by using finite element simulation method, the quantitative relationship between the MFL circle in By~Bz diagram and the degree of defects is established. The difference of magnetic leakage caused by internal and external defects of wire rope is discussed, and experimental verification is carried out in order to provide a new theoretical basis for quantitative identification of wire rope damage and judgment of internal and external defects.

Key words: magnetic flux leakage detection, three dimensional magnetic dipole, finite element analysis, quantitative analysis